Notes & Notation

The Notes
Do Re Mi Fa So La Ti Do (A relative scale)
Bansuri use a relative scale, similar to the 'do, re, mi' concept. The notes are not measured in pitch (hertz), but are in relation to the first note. Western scales are usually 'absolute', based on 'A = 440 hertz' and 'middle C' which is 261.626 hertz, so that each note is measurable and can easily be repeated anywhere around the world, on any properly tuned instrument. This is possible because 'hertz' are measurable units of vibrations per second. Relative scales can start anywhere, so 'do' might be 'C' or it might be any other note or a note that is unrelated to western pitch. Furthermore, the notation system is based on finger position, rather than tone. What this means is that;

Songs can be played on any bansuri, regardless of flute length. Key is not a constraint. The same tune will sound different on 2 flutes of different keys, but the playing and notation method will not change. The `notes` represent finger positions, not tones.

Bansuri have 6 playable holes (usually), and the basic scale starts with the top 3 holes closed. This note is 'Sa'. The basic scale is as follows; (I have added rainbow colours for ease of visualization).

Sa  Re  Ga  ma  Pa  Da  Ni Sa

Sa  (Top 3 holes closed)
Re  (Top 2 holes closed)
Ga  (Top hole closed)
ma  (Top hole half closed - I use a small 'm' here, because there is also 'Ma'.)
Pa  (6 holes closed)
Da  (Top 5 holes closed)
Ni  (Top 4 holes closed)

From this point we will reach Sa one octave above our starting note, with the same finger position as we started with, 3 holes closed. The upper octave is reached by changing your mouth shape (embouchure) which refocuses the air. Bansuri can play two to two and a half octaves, more on this later!



The Notation System

We need one system for the lower octave, one for the middle octave and another for the upper octave.

For the lower octave, we write;

,S ,R ,G ,m ,P ,D ,N  

However, bansuri cannot play the first 4 of these notes, and so you will not see them notated in bansuri music. The first complete scale on the bansuri starts in the 'mid octave' at S.
The full basic scale is;

S R G m P D N

Even though this scale is notated without lower or upper octave marks, on bansuri, the first 4 notes are made by blowing the lower octave, but to reach the next 3 notes you will have to alter your embouchure to find the next octave for those finger positions. This seems counter intuitive at first, but makes sense if you keep in mind that the scale begins with 3 holes closed.

'S 'R 'G 'm 'P 'D 'N  are used for the octave above.

Half notes (called 'Komal Swara')  are frequently played, and are notated using small letters (lower case alphabet), as in 'ma' in the basic scale.

,d  (Five and half holes closed, lower octave)
,n  (Four and a half holes closed, lower octave)
 (Two and a half holes closed, lower octave)
g  (One and a half holes closed, lower octave)
m  (Half a hole closed, lower octave) * Although this note is a half note, it is not considered 'Komal Swara, as it is included in the natural scale.
(All holes are open, lower octave) * The natural scale is played with the note 'm' as a half closed note. But sometimes scales will call for this note to played totally open. This is notated as 'M'. So during the practice sessions, if you see 'm' you will know this is maplayed with the first hole half closed, and 'M' is played with the first hole totally open.

Songs can be notated without an indication of octave, or showing S rather than ,S for the sake of ease. Songs are handed directly from teacher to student by playing rather than as a score, so the notation system is not always 100% accurate.

Common student flutes are tuned to Sa = G or shorter, such as G#. These flutes are short enough for most beginners to be able to play. Most concert flutes are Sa = E, but these are longer and require more skill to play. Longer flutes have deeper notes but lack the responsiveness and expression of higher flutes. For children (aged between 7 - 14), a Sa = C is a suitable sized flute.

14 comments:

  1. sir can you tell me please how to half close a key hole in the flute ..i am a beginner and i am trying really hard to learn how to play the bansuri ..

    ReplyDelete
    Replies
    1. Hi Udoy I am From Mumbai India.
      I am also a student of Bansuri, but just a bit experiences then you what you said that you are a fresher.
      So udoy cover 60% hole for flat note.
      But i would like to suggest you one thing that please get a teacher to learn Bansuri.
      And if you having financial issue, So go on you tube there are many teachers who are providing lessons and exercises where you can learn much things.
      Thanx
      Warm wishes
      Raghuveer Singh

      Delete
    2. Sir Can u Suggest any Good Teacher in Mumbai if u Know as you Suggested Udoy.

      Delete
  2. It's very clear, thanks a lot !!!

    ReplyDelete
  3. This is awesome ...cleared a lot thank you

    ReplyDelete
  4. Watch this just for sec atleast

    https://www.youtube.com/watch?v=_MRwmSYVTgA

    ReplyDelete
  5. Watch this just for sec atleast

    https://www.youtube.com/watch?v=_MRwmSYVTgA

    ReplyDelete
  6. Music always stands for the broader outrage of life in the society. You can definitely relate all of your emotions with the help of music. Happiness, agony, pain, disgust, anger, sorrow- everything can be related through the different kinds of music. When it comes to talk about music, you cannot deny the importance of musical instruments which are used along with music. There are lots of instruments used in various types of musical genres. Among all the instruments, flute is considered to be one of the modest and sober instruments used in music. Basically this typical instrument is seen to be used in the traditional country music or folk music. This is really great post to give basic idea for beginners about flute.

    Visit link For more www.urbanpro.com/flute?_r=offpage
    “Flute Classes”

    ReplyDelete
  7. Until and unless a guru , you can't play flute well . I am playing it since my childhood and can play any song But still unable to produce that sweetness. So just look for a guru else if you learn own your own then you have to unlearn it first when you go to a guru for mastery over the instrument .

    ReplyDelete
    Replies
    1. Some spend their whole life and never feel they can produce sweetness with their flute while others can do it naturally, even without a guru.

      Delete
  8. Thanks for great information you write it very clean. I am very lucky to get this tips from you.
    For best music samples and loops
    on Indian Flutes visit mangoloops

    ReplyDelete
  9. Sir,can u tell me how to play upper notes

    ReplyDelete
  10. How can we play noted of any song im flute

    ReplyDelete
  11. My flute is Indian basuri and I don't know how to half close a hole it's very hard close it so sir can you please send me a vedio which have knowable everything sir.

    ReplyDelete